BRP Can-am MAVERICK Trail T Series Operator's Manual page 73

Activating Speed Limiter Mode
1. Press the keypad MENU button to
SETTINGS
go to the
SPEED LIM
2. Select
have a choice of
2.1 in km/h:
– -- (Unlimited)
– 30 km/h
– 40 km/h
– 50 km/h
– 60 km/h
– 70 km/h
– 80 km/h
– 90 km/h
– 100 km/h
2.2 in MPH:
– -- (Unlimited)
– 20 MPH
– 25 MPH
– 30 MPH
– 35 MPH
– 45 MPH
– 50 MPH
– 55 MPH
– 60 MPH
– 65 MPH
Speed limiter indicator will be lit.
219002008-008
TYPICAL
1. Speed limiter INDICATOR
Hold menu button to confirm selected
speed limit.
menu.
, then you will
_______________
NOTE: Activating speed limiter mode
of operation only limits the maximum
speed available when depressing the
throttle. The throttle must be held in to
maintain forward speed. Speed can be
varied from idle up to the set speed us-
ing the throttle once the speed limiter
function is activated.
Deactivating Speed Limiter Mode
To deactivate speed limiter mode, in
SETTINGS
, select
then select the -- (unlimited) limit.
TCS (Traction Control System) (if
equipped)
Press the Gauge Switch to go to the
SETTINGS
menu.
To toggle between TCS ON and OFF,
hold MENU button.
NOTE: TCS will remain off even after
the engine is turned off. To reactivate
TCS, you will have to go in
menu.
7.6" DIGITAL DISPLAY
SPEED LIM
and
SETTINGS
71