Spark Plugs - BRP Can-am MAVERICK Trail T Series Operator's Manual

Spark Plugs

Access to Spark Plugs
ACCESSING MAINTENANCE
Refer to
COMPONENTS
Remove the engine service cover.
219001880-030_a
219001880-057_a
1. Front spark plug
The rear cylinder is accessible from the
RH wheel well.
219001880-041_a
TYPICAL
1. Rear spark plug
and remove the seats.
Spark Plug Removal
Unplug spark plug cable.
219001880-041_a
TYPICAL
1. Spark plug
219001880-042_a
1. Spark plug
Clean spark plug area with pressurized
air before removing spark plug.
Unscrew spark plug completely using
a spark plug socket, then remove it.
Spark Plug Installation
Prior to installation make sure that con-
tact surface of cylinder head and spark
plug is free of grime.
Using a feeler gauge, set the spark plug
gap.
800, 1000 and
1000R
Apply a small amount of copper-based
anti-seize lubricant over spark plug
threads.
______________
MAINTENANCE PROCEDURES
SPARK PLUG GAP
0.8 mm to 0.9 mm
(.031 in to .035 in)
117