Daikin VRV IV+ Service Manual page 232

3 | Components
Service manual
232
a Compressor pipe
CAUTION
Overheating the compressor pipes (and the oil inside the compressor pipes) will
damage or destroy the compressor.
6 After soldering is done, stop the nitrogen supply after the component has
cooled‑down.
7 Connect the Faston connectors to the compressor wire terminals U, V and W
a
a Faston connector
8 Install the cover of the compressor wire terminals.
a
a
a
a
REYQ8~20+REMQ5U7Y1B
VRV IV+ Heat Recovery
ESIE18-15B – 2020.05