Spectrum Controls Micro800 2085sc-IF16C User Manual page 38

Expansion i/o 16-channel analog input module
Hide thumbs Also See for Micro800 2085sc-IF16C:
Table of Contents

Advertisement

3-12
Chapter 3: Configuring the 2085sc-IF16 Using CCW
It is recommended that before manually or automatically pasting your configuration settings to the textbox
4
of the CCW Configuration tab, be sure to select the Hex Radix indication on both software packages. The
CCW software is unable to receive negative values under Decimal Radix indication.
User's Manual Pub. 0300306-02 Rev. B
You can manually copy the settings and paste it to the textbox of the
CCW Configuration tab
The example below shows example channel 0 selections in the utility and
the associated channel 0 configuration text generated from those
selections:
7. To automatically copy the generated settings into the textbox of the
CCW Configuration tab, have the textbox visible on the monitor screen,
and then click Copy to CCW button
The utility copies the configuration settings and shows it inside the
textbox. Example shown below is for 16V:
8. Download the CCW project to controller and start to run the module
operation.
.
4
.
4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Micro800 2085sc-IF16C and is the answer not in the manual?

This manual is also suitable for:

Micro800 2085sc-if16v

Table of Contents