3-6
Chapter 3: Configuring the 2085sc-IF16 Using CCW
Section 3.3
CCW
Configuration
Tab
NOTE
User's Manual Pub. 0300306-02 Rev. B
Before you start, if needed, install the latest version of Rockwell Automation's
Connected Components Workbench (CCW) Standard Edition.
Using the Module Profile Tool to import the 2085sc-IF16C or 2085sc-
IF16V AOP into CCW software is necessary only if you are using a CCW
version earlier than 11.00.00. For information on manually importing an
AOP file, see Appendix A. For Version 11.00.00 and later, the module is
already available as a selection from the CCW Expansion Modules drop-
down menu:
To add the module to your project, and see its configuration parameters on the
CCW configuration tab:
1. From your CCW project, load the module AOP to a first Available slot
from the Expansion Modules drop-down list.
2. Once the module AOP is loaded, to view the associated variables, click
the Module Catalog Name option.
Need help?
Do you have a question about the Micro800 2085sc-IF16C and is the answer not in the manual?