Kontron cPCI-DMXS64GX Technical Reference Manual page 94

cPCI-DMXS64GX Technical Reference Manual
Power Management Setup (Continued)
BIOS
Option
Defaults
Resume by Ring Dis.
IRQ 8 Break Suspend Dis.
Resume by Alarm Dis.
Reload Global Timer Events:
IRQ[3-7,9-15], NMI Dis.
Primary IDE 0 Dis.
Primary IDE 1 Dis.
Secondary IDE 0 Dis.
Secondary IDE 1 Dis.
Floppy Disk Dis.
Serial Port En.
Parallel Port Dis.
Setup Possible
Defaults Settings
En. En./Dis. When Enabled and a modem is connected to a serial port, allows a
modem ring to re-activate the CPU when in Suspend mode.
En. En./Dis. When Enabled, the RTC alarm interrupt is monitored to allow an
interrupt to awaken the system when in Doze, Standby or Suspend
Mode.
Dis. En./Dis. When Enabled, allows setup of a time to re-activate the CPU when in
Suspend mode with the options Date (of Month) Alarm and Time
(hh:mm:ss) Alarm.
Note: The IRQ 8 Break Suspend option in this setup screen must
be Enabled to use the RTC alarm.
En. En./Dis.
En. En./Dis.
En. En./Dis.
When any of the options below is Enabled, monitoring of the interrupt
En. En./Dis.
will occur to allow an interrupt to awaken the system when in Doze,
En. En./Dis.
Standby or Suspend Mode.
En. En./Dis.
En. En./Dis.
En. En./Dis.
4.12
Description