Kontron cPCI-DMXS64GX Technical Reference Manual page 130

cPCI-MXS64GX Technical Reference Manual
POST Codes (continued)
POST Designation
#
0E Test Video Memory
0F Test DMA Controller 0
10 Test DMA Controller 1
11 Test DMA Page Registers
12 Reserved
13 Reserved
14 Test Timer Counter 2
15 PIC Test 8259-1 mask bits
16 PIC Test 8259-2 mask bits
17 Test Struck 8259's Interrupt Bits
18 Test 8259 Interrupt functionality
19 Test Struck NMI Bits (Parity/ IO
check)
1A-1E Reserved
1F Set EISA Mode
20-2F Enable Slots 0-15
Description
1. If CGA or MONO, test video memory.
2. Beep the speaker.
3. Show the LOGO.
4. Install VT100 driver if necessary.
5. Write sign-on message to screen.
6. Write Copyright message to screen.
7. Write Evaluation message to screen.
8. Show CPU type and speed.
Test DMA Controller 0.
Test DMA Controller 1.
Test DMA Page Registers.
Reserved for 8254 Counter 0 - Not implemented.
Reserved for 8254 Counter 1 - Not implemented.
Test 8254 Timer 0 Counter 2.
Verify 8259 Channel 1 masked interrupts by alternately turning off and
on the interrupt lines.
Verify 8259 Channel 1 masked interrupts by alternately turning off and
on the interrupt lines.
Nothing
Force an interrupt and verify that the interrupt occurred (IRQ 0 - clock
int. 8h).
Nothing.
Reserved
If EISA non-volatile memory checksum is good, execute EISA
initialization. If no, execute ISA test and clear EISA mode flag. Test
EISA Configuration Memory integrity (checksum & communication
interface).
Initialize slot 0 (System Board) to slot 15.
F-6