Table of Contents
Advertisement
F.4
POST C
ODES
POST
Designation
#
01
BOOT BLOCK
03
Initialize Chips
04
Test Memory Refresh Toggle
05
Blank Video, Initialize Keyboard
06
EPROM Checksum
07
Test CMOS Interface and
Battery Status
08
Program Chipset default
09
Early Cache Initialization
0A
Setup Interrupt Vector Table
Description
Boot Block in EMERGENCY : Clear Base Memory Area.
1.
Clear CMOS shutdown byte.
2.
Initialize EISA extended registers. (Not for us since we don't have
EISA bus.)
RAM must be periodically refreshed in order to keep the memory from
decaying.
1.
Clear CMOS reset status
byte.
2.
Early Keyboard
initialization.
1.
Test F000h segment shadow readable and writeable for POST
access correct.
If not, show POST FE and beep continuously...
2.
Autodetect Flash EPROM.
Kontron
1.
Install the
segment.
2.
Verifies CMOS is working correctly (walking bit test).
3.
Restore CMOS from Flash if option is enabled.
4.
Check for OVERRIDE KEY (INSERT key).
Program Chipset default (show POST BEh).
1.
Check for Intel's and/or Cyrix CPU.
2.
Early Cache Initialization when cache is separate from chipset.
3.
Turn off Gate A20.
1.
Initialize first 120 interrupt vectors with SPURIOUS_INT_HDLR and
initialize int. 00h-1Fh according to INT_TBL.
2.
Early Power Management Initialization.
F-3
BIOS Setup Error Codes
Boot Block in EMERGENCY: Initialize
Keyboard Controller.
Advertisement
Table of Contents
