Table of Contents
Advertisement
POST Codes (continued)
POST
Designation
#
30
Size Base & Extended Memory
31
Test Base & Extended Memory
32
Test EISA Extended Memory
33-3C
Reserved
3C
Setup Enable
3D
Initialize & Install PS/2 Mouse
3E
Setup Cache Controller
3F-40
Reserved
41
Initialize Floppy Drive &
Controller
42
Initialize Hard Drive & Controller
43
Detect & Initialize
Serial/Parallel/Joystick ports
44
Reserved
45
Detect & Initialize Math
Coprocessor
46
Reserved
47
Set Speed for Boot
Description
Size base memory from 256K to 640K and extended memory above
1MB.
1.
Test base memory from 256K to 640K and extended memory
above 1MB using various patterns.
2.
The last test is filling memory with 0's.
3.
On a quick memory test or if user press the ESC key while testing
memory, only the last test is performed.
If EISA Mode flag is set, then test EISA memory found in slots
Initialization.
NOTE 1: This will be skipped in ISA mode.
NOTE 2: This POST also Detect & Report I/O PORTS and also Init.
Super IO.
Reserved
Detect if mouse is present. Initialize mouse. Install interrupt vector.
Initialize cache controller.
Reserved
1.
Verify if we should enter
setup. If so, enter setup.
2.
Initialize floppy disk drive
controller and any drive.
Initialize hard drive controller and any drive. (Call HD_INSTALL).
Initialize any serial, parallel and game ports.
Reserved
Initialize Math Coprocessor.
Reserved
Set Speed for Boot.
F-7
BIOS Setup Error Codes
Boot Block in EMERGENCY: Scan
for Floppy for emergency disk...
Advertisement
Table of Contents
