Table of Contents
Advertisement
F. BIOS SETUP ERROR CODES
F.1
POST B
EEP
POST beep codes are defined in the BIOS to provide low level tone indication when an
error occurs during the BIOS initialization.
Beep codes consist of a combination of long and short beeps. They are described as
follows:
Beep Codes
Post
Beep Code
code
41
**-*
22
*-*-*
33
*-*-*-*
44
*-*-*-*-*
55
*-*
Legend
* = 1 Short beep code, ** = 1 Long beep code, - = Silence
F.2
POST M
ESSAGES
During the Power On Self Test (POST), if the BIOS detects an error requiring you to do
something to fix, it will either sound a beep code or display a message.
If a message is displayed, it will be accompanied by:
"PRESS F1 TO CONTINUE, DEL TO ENTER SETUP".
Description
Enterring the boot block recovery code (i.e. Main BIOS
checksum error)
Error when getting the boot block flash ID code
Error when erasing the boot block flash
Error when programming the boot block flash
Success of the boot block recovery code. The board is
ready to be manually reset.
F-1
Advertisement
Table of Contents
