Table of Contents
Advertisement
4 SOFTWARE INSTALLATION
4.1 APPLICATION SOFTWARE AND OPERATING SYSTEM
The panel is designed to work with different operating systems. To install
operating system or application software follow the installation instructions of
the software.
4.2 HARDWARE DRIVERS
On preinstalled systems no drivers had to be installed by a technican or user. If
no operating system was installed, you had to install drivers for the implemented
hardware to get full function of the panel. All the drivers are stored on the
provided Support CD. Drivers also available at the online support at
If you need additional help please contact Kontron customer service.
4.2.1 Install Touch driver
Installed touch controllers
Installed Touch
10,4"
SS
Elo touchcontroller
DMC touchcontroller
X
SS=stainless steel Front bezel , ALU= Aluminium Front bezel
Preparations of system
Before installing the driver please check the following items.
- USB Port in BIOS enabled
- USB Port driver for operating system installed.
- Device for loading the drivers is installed
- Optional: download driver from WEB
Install DMC touch driver
Installation procedure
To start driver installation please go to the folder where all the driver files are
stored. Start driver installation by double click on file "SETUP.exe" in the
respective folder. Confirm each opened window with "NEXT" when choice is
done. Please observe that during installation no error occurs.
http://www.kontron.com
http://www.kontron.com.
12,1"
15"
ALU
SS
ALU
SS
ALU
X
X
X
X
X
17"
19"
SS
ALU
SS
ALU
X
X
X
X
Werner-von-Siemens Str.1
D - 93426 Roding
Tel:
+49 9461 950 - 0
Fax: +49 9461 950 - 100
15
Advertisement
Table of Contents
