Pepperl+Fuchs FieldConnex HD2-DM-A Manual page 77

H D 2 - D M - A / D M - A M
Field device activity status display Process area
•
•
Inactive Field devices do not cause an alarm annunciation within the Di-
agnostic Manager. Those alarms are released centrally by the Host /
Master application.
Add New Field Device to Target Configuration
You can do this action in both the Online and the Offline interface.
1. Highlight Field Devices in the Label area
2. Press the button Add a new Field Device to the Target Configu-
ration in the Process area
A new field device appears in the Target Configuration table
Add Unconfigured Field Device to Target Configuration
You can do this action in both the Online and the Offline interface.
1. Highlight Field Devices in the Label area
2. Press the button Add to target in the Unconfigured Field Device
table
•
Remove a Field Device from the Target Configuration
You can do this action in both the Online and the Offline interface.
1. Highlight Field Devices in Label area
2. Press the button Remove in the field device target configuration
table
Remove all Inactive, Unconfigured Field Devices
You can do this action in the Online interface only.
1. Highlight Field Devices in the Label area
2. Press button Remove all inactive, unconfigured Field Devices
in the Unconfigured Field Device table.
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
Operation with the Diagnostic Manager
Field device active
Field device not active
Copyright Pepperl+Fuchs, Printed in Germany
77