Pepperl+Fuchs FieldConnex HD2-DM-A Manual page 37

H D 2 - D M - A / D M - A M
•
Figure 5.21: Fieldbus Diagnostic Server Parameter window
10. Enter the appropriate values of the PC on which the FDS is run-
ning (see chapter 7.4). If FDS is running on the same PC as the
Diagnostic Manager, choose local
•
Figure 5.22: Settings when FDS is running on the same PC
Perform Topology Scan
1. Right-click on the FieldConnex Diagnostic Server (FDS) in
your project and select Connect
2. Right-click on FDS in your project and select Additional
functions/Topology Scan
A list with all COM Ports FDS are connected to is shown.
3. Select the COM Ports you want to add to the project
4. Restrict the Diagnostic modules address range to speed up scan-
ning
•
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
Application Engineering HD2-DM-A
Copyright Pepperl+Fuchs, Printed in Germany
37