H D 2 - D M - A / D M - A M
•
Figure 6.4: Create a new PACT
8. Approve with Yes.
The Diagnostic Manager is now installed and ready to run.
DM-AM Commissioning with PACT
To commission the DM-AM Diagnostic Manager proceed as follows:
1. Start PACT
2. Make sure that the latest Diagnostic Manager version is installed
and that the device catalog is updated (see above).
3. Open the corresponding project or create a new one
4. Open the device catalog View/Device catalog or press F3
5. Open folder Pepperl+Fuchs GmbH
•
Figure 6.5: Device structure PACT
6. Choose Driver/FieldConnex Diagnostic Server (FDS)
•
Figure 6.6: Device structure driver
7. Drag&Drop FieldConnex Diagnostic Server (FDS) into your
project window/HOST PC
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
Application Engineering DM-AM
TM
device catalog
ware
TM
ware
TM
ware
TM
ware
Copyright Pepperl+Fuchs, Printed in Germany
49