Pepperl+Fuchs FieldConnex HD2-DM-A Manual page 30

Application Engineering HD2-DM-A
Diagnostic Manager Installation with PACT
If the driver signing function is enabled on your system, Windows
show some error messages like: „no Windows
ware" during installation. Ignore such messages or disable the signing
function and continue the installation process.
No network connectivity
•
Disable Windows
after setup is completed and FDS is running for the fist time.
To install the FieldConnex
1. Start the setup
2. Choose required software components (see readme file)
3. Proceed installation with Next and follow the instructions of the in-
stallation wizard
4. Choose installation for HD2-DM-A and activate Diagnostic Manag-
er and FieldConnex Diagnostic Server (by using a remot applica-
tion structure (see chapter 5.2.2) the FieldConnex Diagnostic
Server must be installed on the Server/Cabinet PC)
5. Run PACT
6. Make sure that all PACT
7. Update the device catalog
•
Figure 5.6: Update device catalog
The window Create a new PACT
•
Figure 5.7: Create a new PACT
8. Approve with Yes.
9. Choose Extras/Options
Subject to reasonable modifications due to technical advances.
30
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
TM
Firewall for FieldConnex
R
Diagnostic Manager, proceed as follows:
TM
ware
TM
ware
TM
device catalog
ware
H D 2 - D M - A / D M - A M
TM
from CD
ware
TM
certified driver soft-
R
Diagnostic Sever (FDS)
projects are closed
TM
device catalog appears.
ware
Copyright Pepperl+Fuchs, Printed in Germany
TM
will