Application Engineering DM-AM
Assemble the Test Plug
1. Disconnect the three Test Plugs.
•
2. Remove the Metal Part from the Test Plug.
•
3. Stick one lead through the Test Plug into the Metal Part.
•
4. Solder up the lead within the Metal Part.
•
5. Repeat step 3 and 4 with all three leads.
•
6. Screw the Metal Parts back again into the Test Plugs.
•
Subject to reasonable modifications due to technical advances.
46
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
H D 2 - D M - A / D M - A M
Solder up
Copyright Pepperl+Fuchs, Printed in Germany