Pepperl+Fuchs FieldConnex HD2-DM-A Manual page 71

H D 2 - D M - A / D M - A M
The Measured value interface shows all physical layer data and param-
eters for monitoring only. Values cannot be changed with this interface.
•
Offline
interface
Figure 8.11: Online- Offline- and Measured value interface overview
Data Loss
•
Changes made in the Online interface are not automatically stored to the
Offline interface.
To synchronize Online data, load data from the device into the Offline in-
terface.
For further explanation of the different parameters please refer to chap-
ter 9.
Open Offline Parametrization
1. Right-click on the Diagnostic Module in the project tree
2. Choose Parameter/Offline parametrization
•
Figure 8.12: Labeling in title bar
Open Measured Value Interface
Make sure that Diagnostic Manager is connected to the Diagnostic
Module and the FDS is running.
1. Right-click on the Diagnostic Module in the project tree
2. Choose Parameter/Measured value
•
Figure 8.13: Labeling in title bar
A small rhombus next to the device icon in the project tree indicates that
the Diagnostic Manager is connected to the Diagnostic Module.
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
Operation with the Diagnostic Manager
Measured
value
Device
Online
interface
Copyright Pepperl+Fuchs, Printed in Germany
71