Pepperl+Fuchs FieldConnex HD2-DM-A Manual page 34

Application Engineering HD2-DM-A
•
Figure 5.15: FDSPort settings
The COM-Port address selects the serial interface to which the Diagnos-
tic modules are connected.
15. Go back to the Device catalog and choose
Device/HD2-DM-A
16. Drag&Drop the HD2-DM-A modules into your project to the FDS
Port
Now the diagnostic project looks like:
•
Figure 5.16: Diagnostic project
For fast creation of projects with a huge number of Diagnostic modules:
Build up one FDS Port with 31 Diagnostic Modules and use Copy&Paste
to duplicate it within the project, if supported by the FDT-Software.
Each FDS Port must not contain more than 31 Diagnostic Modules.
Subject to reasonable modifications due to technical advances.
34
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
H D 2 - D M - A / D M - A M
Copyright Pepperl+Fuchs, Printed in Germany