Pepperl+Fuchs FieldConnex HD2-DM-A Manual page 41

H D 2 - D M - A / D M - A M
Load saved Configuration from FDS Server
1. Start PACT
2. Open the device cataloge and Drag&Drop FieldConnex Diagno-
stic Server into your project window/HOST PC or open a
PACT
3. Right-click on the FDS in your project and choose Conect
4. Right-click on the FDS in your project and choose Additional
functions/Get Topology
5. Set Read Topology from FDS Server
6. Go forward with Next
The wizard shows the loaded configuration and the changes that
will be made in your active project.
7. Go forward with Next and follow the instructions of the wizard.
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
TM
ware
TM
diagnostic project.
ware
Application Engineering HD2-DM-A
Copyright Pepperl+Fuchs, Printed in Germany
41