Pepperl+Fuchs FieldConnex HD2-DM-A Manual page 33

H D 2 - D M - A / D M - A M
9. Right-click on the FieldConnex
and select Parameter
The parameter window opens:
•
Figure 5.12: Fieldbus Diagnostic Server Parameter window
10. Enter the appropriate values of the PC on which the FDS is run-
ning (see chapter 7.4). If FDS is running on the same PC as the
Diagnostic Manager, choose local
•
Figure 5.13: Settings when FDS is running on the same PC
11. Go back to the Device catalog and choose Gateway/FDSPort
12. Drag&Drop FDS Port into your project to the FDS
•
Figure 5.14: Drag&Drop the FDSPort
13. Right-click on the FieldConnex
and choose Additional functions/"Address/TAG Configurati-
on"
14. Choose the corresponding COM-Port address from the DropDown
list
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
Application Engineering HD2-DM-A
R
Diagnostic Server in your project
R
Diagnostic Server in your project
Copyright Pepperl+Fuchs, Printed in Germany
33