Sending Faxes - Canon Pixma MP530 User Manual

Printing the ACTIVITY REPORT
1
Press [FAX], then press [Menu].
2
Use [ ] or [
3
Use [ ] or [
The ACTIVITY REPORT is printed.
USER'S DATA LIST
The USER'S DATA LIST enables you to confirm the current settings of your machine as well as
the registered sender information (See
Printing the USER'S DATA LIST
1
Press [FAX], then press [Menu].
2
Use [ ] or [
3
Use [ ] or [
The USER'S DATA LIST is printed.
TX REPORT
Your machine can print a TX (transmission) REPORT after sending a document. You can set the
machine to print every time it sends a document, or only when an error occurs. Alternatively, you
can disable printing of a report.
Note
For details on the TX REPORT setting, see
The default setting is <PRINT ERROR ONLY>.
RX REPORT
Your machine can print an RX (reception) REPORT after receiving a document. You can set the
machine to print every time it receives a document, or only when an error occurs. Alternatively,
you can disable printing of a report.
Note
For details on the RX REPORT setting, see
The default setting is <DO NOT PRINT>.

Sending Faxes

Documents You can Fax
For information on the types of documents you can fax, their requirements, and details on
loading them, see
Flow of Sending Faxes
The operation flow of sending faxes is as follows:
Chapter 4
] to select <PRNT REPORT/LIST>, then press [OK].
] to select <ACTIVITY REPORT>, then press [OK].
"Registering Sender Information" on page
] to select <PRNT REPORT/LIST>, then press [OK].
] to select <USER'S DATA LIST>, then press [OK].
"Document Handling" on page
"TX SETTINGS" on page
"RX SETTINGS" on page
19.
62).
94.
95.
71
Faxing