Connect a telephone to your machine if you want to talk to the recipient before
sending a document.
Load the document in the ADF.
For details on how to load documents, see
Adjust the settings for your document as necessary.
To select the image quality (fax resolution), see
Resolution)" on page
To select the scan contrast, see
You can lift the handset if an answering machine is connected to the machine.
Dial the recipient's number using the numeric buttons or coded speed dialing.
For details on how to use coded speed dialing, see
Talk through the handset to the recipient.
If you hear a high-pitched signal instead of the recipient's voice, go to step 9.
Ask the recipient to set recipient's fax machine to receive faxes.
When you hear a high-pitched signal, press [Color] for color sending, or [Black] for
black & white sending. Then hang up the handset.
Color sending is available only when the recipient's fax machine supports color faxing.
To cancel manual sending, press [Stop/Reset].
Sending Faxes from Your Computer
With your machine connected to your computer, you can send faxes from the computer. For
details, refer to the FAX Driver Guide.
How to Use Coded Speed Dialing
Pre-registering fax numbers in coded speed dials enables you to dial them by just pressing
[Coded Dial] and entering a two-digit code.
Press [Coded Dial].
"Loading Documents" on page
"Adjusting the Scan Contrast" on page
"Adjusting the Image Quality (Fax
"How to Use Coded Speed Dialing" on