Changing the Paper Source to Feed Different Types/Sizes of Paper
If you load plain paper in the Cassette and photo paper in the Auto Sheet Feeder, changing the
paper source allows you to print on both types of paper without removing and reloading paper.
To change the paper source, use [Feed Switch] on the machine or printer driver.
You can also specify the type/size of paper to be fed from the Cassette for regular use with the
printer driver. For example, you can specify that Letter-sized plain paper is always fed from the
Cassette whenever you print.
For information on page size, media type, and paper support load limit for Auto Sheet
Feeder or Cassette, see
For information on the printer driver settings, refer to the Printer Driver Guide.
(A) Auto Sheet Feeder
(B) You can switch between paper loaded in the Auto Sheet Feeder (e.g., 4" x 6" / 101.6 x 152.4
mm) or Cassette (e.g., A4/Letter-sized paper).
Continuous Printing on the Same Type/Size of Paper by Using Both the
Auto Sheet Feeder and Cassette together
If the Auto Sheet Feeder or Cassette runs out of paper, the paper source automatically switches
to the other one. This is useful for printing onto a large volume of paper.
When printing from a computer, you need to set this feature with the printer driver. For
details, refer to the Printer Driver Guide.
This feature can be used only when paper of the same size and media type are loaded in
the Cassette and Auto Sheet Feeder.
When printing from a computer, this feature can be used only when both paper sources are
loaded with paper other than Credit Card- or Legal-sized paper.
In Copy mode, this feature can be used only when both paper sources are loaded with
paper other than Credit Card- or Legal-sized paper.
In Fax mode, this feature can be used only when both paper sources are loaded with A4-
or Letter-sized plain paper.
This feature cannot be used for the Sticker copy.
"Recommended Paper and Requirements" on page