Main Components and Their Functions
(1) ADF (Auto Document Feeder)
Automatically scans in documents loaded in the Document Tray.
(2) Feeder Cover
Open this cover when clearing jammed documents.
(3) Document Guides
Adjust these guides to match the document width.
(4) Paper Support
Supports paper loaded on the tray. Extend it before loading paper by putting your finger in
the rounded hollow and pulling out the extension until it stops.
(5) Paper Guide
When loading paper, ensure that the left edge just touches this guide.
To move the Paper Guide, pinch the knob and slide in the appropriate direction.
(6) Auto Sheet Feeder
Load paper here before printing. Paper feeds automatically, one sheet at a time.
(7) Cover Guide
Align the right side of the paper to this guide.
(8) Document Tray
Open this tray to load a document. Once loaded, the document is fed one page at a time.
Load the document with the side you want to scan face up.
(9) Document Output Slot
Documents scanned from the Document Tray are delivered here.
(10) Document Cover
Open this cover when loading a document on the Platen Glass.