Inside of the machine is dirty.
If the inside of the machine is dirty, printed paper may be smudged.
Follow the steps described below to clean the inside of the machine.
1. Press [ON/OFF] to turn on the machine, then remove any paper from the
Auto Sheet Feeder.
"Turning on the Machine" on page
2. Press the Open Button to open the Paper Output Tray, and open up and
set the extension by pressing down the hollow on the front side.
3. Place the only one sheet of A4/Letter-size plain paper in landscape,
horizontally fold it in half.
4. Unfold the paper, and load the paper in the Auto Sheet Feeder with the
inverted-V edge down.
5. Use [
] or [
] to select <BOTTOM CLEANING> from the
<MAINTENANCE> and press [OK].
The paper that is loaded in the machine will feed through the machine
and be ejected.
If protrusions inside the machine are stained, wipe ink off the
protrusions using a swab or the like.
Before cleaning, be sure to turn off the machine.