Turning The Machine On And Off - Canon Pixma MP530 User Manual

Turning the Machine ON and OFF

Turn on the machine before starting printing.
Turning on the Machine
Before turning on the machine, confirm that the Print Head and ink tanks are set into place.
Note
If preparatory operations above are not yet finished, follow the Easy Setup Instructions to
complete them.
1
To turn on the machine, press [ON/OFF].
[COPY] flashes green for a while, and then turns on.
Note
If the Alarm Lamp lights or flashes orange and an error message is displayed on the LCD,
see "An Error Message is Displayed on the LCD" on page
The machine goes into the Power Saver Mode if not operated for the specified time (the
default is 5 minutes) (See
to restore the display.
Turning off the Machine
1
To turn off the machine, press [ON/OFF].
The machine is off when the currently selected Mode button (e.g. [COPY]) stops flashing and
all Operation Panel lamps are off.
Important
When removing the power plug after turning off the machine, be sure to check that all the
lamps on the Operation Panel are not lit. If the power plug is removed from the wall outlet with
the lamps on the Operation Panel lighting or flashing, the machine cannot protect its Print
Head and may be unable to print.
Note
The power cannot be turned OFF while the machine is sending or receiving a fax, or when
there are unsent faxes stored in the machine's memory.
Setting the Power Saver Mode
<POWER SAVER MODE> will be displayed on the screen, if the machine is not operated for the
specified time (the default is 5 minutes).
You can change the interval of time to go into the Power Saver Mode as follows:
18
Before Printing
"Setting the Power Saver Mode" on page
113.
18). Press any button
Chapter 1