Alarm Menu - Furuno DSC-60 Operator's Manual

7.2

Alarm Menu

The Alarm menu enables/disables internal and external alarms. Note that the Distress/Urgency
alarm cannot be disabled. Press the [#/SETUP] key, select ALARM and press the [ENT] key to
display the Alarm menu.
Alarm setup
****
INTERNAL AUDIO ALARM
RCVD CALL
OLD POSITION
POSITION OLDER
EXT ALARM : DSTRS/URG
7-2
Default: ON
ON
OFF
or
to set.
Default: ON
ON
OFF
or
to set.
***
: ON
: ON
: 4.0 H
Default: 4.0 hours
4.0
3.0
2.0
1.0
0.5
or
to set.
Default: DSTRS/URG
DSTRS/URG
ROUTINE
ALL
OFF
Disables/enables alarm for received Safety,
Ship's Business and Routine messages.
Note: Alarm for Distress and Urgency
messages cannot be disabled, and its
decibel level is fixed at 75-85 dB.
Disables/enables old position alarm in manual
position entry mode, which alerts the operator
when position data is older by the number of
hours or minutes set in the Position Older field.
WATCH KEEPING
DISTRESS
2187.5
4207.5
Warning:
16804.5 12577.0
ROUTINE
Update position
2177.0
4219.5
16903.0 12657.0
35˚00.000N 135˚00.000E 23:59
VOLUME
Message shown when position is
older than preset on the Alarm
setup menu.
Alarm is output when position is older by the
number of hours set here.
Note: Authorities require that position be
updated at least every four hours.
Sets type of message to be output to the
IC-303 incoming Indicatior.
DSTRS/URG: Distress or urgency
ROUTINE:
ALL:
OFF:
AUTO ACK
6312.0
8414.5
6331.0
8436.5
22
message output upon
receipt.
Routine message output
upon receipt.
All messages output.
No output.