2.10 Manual Entry Of Position And Time - Furuno DSC-60 Operator's Manual

2.10 Manual Entry of Position and Time

If there is no EPFS (Electronic Position-Fixing System) connected to the DSC-60 or the EPFS
connected is inoperative, manually enter position and time as follows:
1. At the DSC standby screen, press the [#/SETUP] key to display the Setup menu.
Setup menu
****
ALARM
AUTO ACK
ERASE
MESSAGE
POSITION
PRINT OUT
2. Select POSITION and press the [ENT] key to display the Position menu.
Position setup
**
INPUT TYPE: AUTO
LAT : 34˚ 41 NORTH
LON : 135˚ 30 EAST
TIME: 09: 00 UTC
3. Press the [ENT] key to open the INPUT TYPE menu.
Position setup
**
INPUT TYPE: AUTO
LAT : 34˚ 41 NORTH
LON : 135˚ 30 EAST
TIME: 09: 00 UTC
Note 1: If, when AUTO is selected, input from the navigator is interrupted the message
"EPFS error!" appears. If this occurs check the navigator.
Note 2: If, when MANUAL is selected, the message "Warning: Update position" appears at
set intervals to ask you to update position. For further details see page 7-2.
4. Press to select MANUAL and press the [ENT] key.
5. Press the [ENT] key to open the latitude entry window.
Position setup
**
INPUT TYPE: MANUAL
LAT : 34˚ 41 NORTH
34˚ 41
12
34 ˚ 41 N
LON : 135˚ 30 EAST
TIME: 09: 00 UTC
2-10
****
SCAN FREQ
USER CH
VOLUME
TEST
SYSTEM
**
**
AUTO
N
MANUAL
**
Note: Use
North to South and vice versa.
$
to switch from