Furuno DSC-60 Operator's Manual page 76

11. Press the [ENT] key to open the DSC FREQ menu.
Send message
***
CALL TYPE: Individual
AREA: 001234567
PRIORITY : Routine
COM. TYPE : Telephone
COM. FREQ : No infor
DSC FREQ :
12. Select DSC band and press the [ENT] key. Select DSC frequency and press the [ENT] key.
(See page 4-8 for details.) Your display should now look something like one below.
Send message
***
CALL TYPE : AREA CALL
AREA :
12˚N 123˚W
PRIORITY
COM. TYPE : TELEPHONE
COM. FREQ :
DSC FREQ : 2177.0 KHZ
GO TO ALL VIEW
13. Press the [CALL] key to send the geographical area call (transmission time: about 7 sec.).
The display shows "Geographical area call in progress!" while the call is being sent.
Geographical area
call in progress!
AREA:
12˚N 123˚W
ROUTINE
TELEPHONE
DSC FREQ :
TIME TO GO :
14. After the call is sent (timer counts down to zero), the DSC standby screen automatically
appears. You can now communicate with other party.
4-22
***
2 MHZ
4 MHZ
6 MHZ
8 MHZ
$
12 MHZ
TL
12M-INTL
GO TO ALL VIEW
***
12˚ 12˚
: ROUTINE
2164.0 KHZ
12˚ 12˚
2164.0 KHZ
2177.0 KHZ
7S
Use to scroll
16 MHZ
menu.
18 MHZ
22 MHZ
OTHER: Special, private channels.
25 MHZ
OTHER
MANUAL: For selection of frequency at
MANUAL
radiotelephone when there is "remote control
error."