Furuno DSC-60 Operator's Manual page 100

Unable to acknowledge call received
1) The alarm sounds; press the [CANCEL] or [ENT] key to silence the alarm. The display
changes as below, waiting for the ring back call.
Waiting for
ring-back call.
FROM COAST :
TEL NO. :
DSC FREQ :
TIME TO GO:
2) One of the following displays appears. (For "No response. Try calling again?", press the
[ENT] key followed by the [CALL] key to re-send the call, or press the [CANCEL] key to
cancel the call and return to the DSC standby screen.)
Able acknowledge
call in progress!
TO COAST :
TEL NO.
TELEPHONE
DSC FREQ :
TIME TO GO:
3) After the acknowledge able call is sent one of the displays shown below appears. For
"Pick up the handset or press the CALL key!", pick up the handset or press the [CALL]
key within one minute. (If the handset is not picked up or the [CALL] key is not pressed
within one minute the message "PSTN call canceled. Try calling again?" appears. In this
case, press the [ENT] key to re-send the call.) For "No response! Try calling again?" you
may re-send the call by pressing the [ENT] key followed by the [CALL] key, or cancel the
call by pressing the [CANCEL] key.
Pick up the handset
or press CALL key!
FROM COAST :
TEL NO.
TELEPHONE
DSC FREQ :
TIME TO GO:
4) The message "PSTN call in progress!" appears after you press the [CALL] key. Follow
from 2) above.
4-46
001234567
1234567890123456
12577.5 KHZ
15M00S
001234567
: 1234567890123456
CH121001
12577.5 KHZ
8S
001234567
:
1234567890123456
CH 12001
12577.5 KHZ
60S
No response!
Try calling again?
FROM COAST : 001234567
TEL NO. : 1234567890123456
DSC FREQ :
12577.5 KHZ
RE-SEND
No response!
Try calling again?
FROM COAST :
001234567
TEL NO. :
1234567890123456
DSC FREQ :
12577.5 KHZ
RE-SEND