Furuno DSC-60 Operator's Manual page 56

3. Press the [ENT] key to display the PRIORITY menu.
Send message
***
CALL TYPE: ALL SHIPS
SAFETY
PRIORITY
URGENCY
COM. TYPE : TELEPHONE
DISTRESS
DSC FREQ
GO TO ALL VIEW
4. Select SAFETY, URGENCY or DISTRESS as appropriate and press the [ENT] key.
5. Press the [ENT] key to open the COM. TYPE menu.
Send message
***
CALL TYPE :
PRIORITY :
TELEPHONE
COM. TYPE COM TYPE
NBDP-FEC
DSC FREQ : 2187.5 KHZ
6. Select communication type desired and press the [ENT] key.
7. Press the [ENT] key to open the DSC FREQ menu.
Send message
***
CALL TYPE : ALL SHIPS
PRIORITY : SAFETY
COM TYPE : TELEPHONE
12577.0
16804.5
MANUAL
DSC FREQ
8. Select frequency and press the [ENT] key.
9. Press the [CALL] key to send the call (transmission time: about 7 sec.). The display shows
"All ships call in progress!" while the call is being sent.
All ships
call in progress!
SAFETY
TELEPHONE
DSC FREQ :
TIME TO GO:
10. The DSC standby screen automatically appears after the call is sent (timer counts down to
zero). The equipment is set up for telephone (or NBDP) and safety or urgency priority, using
DSC safety/urgency pair frequencies.
4-2
***
: 2187.5 KHZ
***
ALL SHIPS
SAFETY
GO TO ALL VIEW
***
MANUAL: For manual selection of frequency at
2187.5
radiotelephone when there is "remote control error."
4207.5
6312.0
8414.5
2187.5KHZ
GO TO ALL VIEW
2182.0 KHZ
2187.5 KHZ
5S