How To Set Working Frequency - Furuno DSC-60 Operator's Manual

How to set working frequency

When you send a call set the working frequency as below to communicate with the receiver of
the message. The working frequency can be entered by Tx and Rx and frequencies as below or
channel no. as in "Channel" on the next page.
Routine or ship's business priority
For FREQUENCY or CHANNEL follow one of the sections below.
Frequency
a) Select FREQUENCY and press the [ENT] key.
TX: 0. 0
KHZ
RX: 0. 0 KHZ
b) Key in Tx frequency in five or six digits with the numeric keys and press
enter 12329.0 kHz. If you make a mistake, press the [CANCEL] key and then reenter data.
TX: 12329.0
KHZ
RX: 0.0
KHZ
Note: Working TX and RX frequencies in the message can be selected to 0.0 kHz so that no
information about frequencies is sent out.
c) Enter Rx frequency and press the [ENT] key. The Tx frequency entered appears in the COM.
FREQ field.
Send message
***
INDIVIDUAL
CALL TYPE:
123456789
STATION ID:
: ROUTINE
PRIORITY
: TELEPHONE
COM. TYPE
TX:12329.0 KHZ
COM. FREQ
DSC FREQ : 12M-INTL : 12M-INTL
DSC FREQ
GO TO ALL VIEW
4-6
***
. For example,