Furuno DSC-60 Operator's Manual page 39

12. The SEND MESSAGE screen is redisplayed. Press the [ENT] key to open the COM. TYPE
menu.
Send message
***
DISTRESS
CALL TYPE:
NATURE: FLOODING
TELEPHONE
POS: 35˚N 135˚00E AT 23:25
NBDP-FEC
COM. TYPE: TELEPHONE
DSC FREQ : 2187.5 KHZ
GO TO ALL VIEW
13. Select TELEPHONE and press the [ENT] key. (Telephone is the usual mode, however NBDP
may also be used.)
14. Press the [ENT] key to open the DSC FREQ menu.
Send message
***
AUTO
DISTRESS
CALL TYPE:
2187.5
4207.5
NATURE: FLOSIGNATED
6312.0
POS: 35˚N 135˚00E AT 23:25
8414.5
COM. TYPE: TELEPHONE
12577.0
16804.5
DSC FREQ :
GO TO ALL VIEW
15. Select a DSC frequency (normally 2187.5 kHz) and press the [ENT] key. (AUTO retransmits
the distress alert on 2 MHz, 8 MHz, 16 MHz, 4 MHz, 12 MHz and 6 MHz in sequence if the
distress alert is not acknowledged. The frequency and mode of emission should be set
manually on the radiotelephone when there is "No response: RT"
DSC SSB radiotelephone
2187.5 kHz 2182.0 kHz
4207.5 kHz 4125.0 kHz
6312.0 kHz 6215.0 kHz
8414.5 kHz 8291.0 kHz
12577.0 kHz 12290.0 kHz
16804.5 kHz 16420.0 kHz
16. The display changes as below.
Send message
***
DISTRESS
CALL TYPE:
NATURE: FLOODING
POS: 35˚N 135˚00E AT 23:25
COM. TYPE :
DSC FREQ :
GO TO ALL VIEW
***
***
2187.5 KHZ
NBDP-FEC
2174.5 kHz
4177.5 kHz
6268.0 kHz
8376.5 kHz
12520.0 kHz
16695.0 kHz
***
TELEPHONE
2187.5 KHZ
3-5