Furuno DSC-60 Operator's Manual page 99

11. Do one of the following depending on the message shown at step 10.
Waiting for acknowledge
1) After the timer counts down to zero the following message appears.
PSTN connection
call in progress!
FROM COAST :
TEL No. :
DSC FREQ :
TIME TO GO:
2) After the connection call is sent the following message appears.
Waiting for
acknowledgement.
FROM COAST :
001234567
TEL NO. :
1234567890123456
TELEPHONE CH 12001
DSC FREQ :
TIME TO GO:
Waiting for acknowledgement
3) After the timer counts down to zero one of the following messages appears.
PSTN call connected.
TO COAST :
001234567
TEL NO. :
1234567890123456
TELEPHONE CH 12001
DSC FREQ :
PSTN call connected
PSTN call connected: Your phone rings; pick up the handset and communication with
receiving station.
PSTN connection call in progress!: This means coast station has switched DSC
frequency. (If the channel cannot be used the message "PSTN end of call in progress!"
appears. In this case, start this procedure again.) If the channel assigned is OK the
message "Waiting for acknowledgment." appears.
PSTN end of call in progress!: The channel could not be used. Press the [CANCEL]
key to return to the DSC standby screen. Repeat this procedure to send the call again.
001234567
1234567890123456
12577.5 KHZ
25S
12577.5 KHZ
25S
PSTN connection
call in progress!
FROM COAST :
TEL NO.
DSC FREQ :
12577.5 KHZ
TIME TO GO:
PSTN connection call in progress
001234567
: 1234567890123456
12577.5 KHZ
25S
PSTN end of call
in progress!
TO COAST :
001234567
TEL NO. :
1234567890123456
TELEPHONE CH 12001
DSC FREQ :
12577.5 KHZ
TIME TO GO:
PSTN end of call
7S
4-45