Furuno DSC-60 Operator's Manual page 65

Able acknowledge call received
The audio alarm sounds; press the [CANCEL] key to silence it. The display changes as below.
Press the [CANCEL] key to return to the DSC standby screen. If you are using a FURUNO SSB
radiotelephone the working frequency is automatically set; you may start communications. For
other makes of radiotelephone set communication frequency and class of emission.
Received message
*
JUL-23-1999-23:59
ABLE ACKNOWLEDGE
FROM SHIP:
ROUTINE
TELEPHONE
GO TO ALL VIEW
Unable acknowledge call received
The alarm sounds; press the [CANCEL] key to silence the alarm, and the display looks
something like the one below. Send the call again later. If the coast station sends the message
"QUEUE INDICATION," wait until your turn arrives.
Received message
*
JUL-23-1999-23:59
NO REASON GIVEN
FROM SHIP:
123456789
ROUTINE
GO TO ALL VIEW
No response! Try calling again?
Re-send call: Press the [ENT] key (the display shown in step 12 appears) followed by the
[CALL] key
Cancel call: Press the [CANCEL] key to return to the DSC standby screen.
*
ECC: OK
123456789
NO INFO
Reason for unable to acknowledge:
*
NO REASON GIVEN
ECC: OK
CONGESTION AT SWITCHING CENTRE*
BUSY
QUEUE INDICATION*
STATION BARRED*
NO OPERATOR AVAILABLE*
OPERATOR TEMPORARILY UNAVAILABLE*
EQUIPMENT DISABLED
MODE NOT USABLE
CHANNEL NOT USABLE
* Coast station use
4-11