Furuno DSC-60 Operator's Manual page 111

How to Enter File Name and Number
1. Press the [ENT] key to open the file name entry window.
Message file entry
*
FILE NAME
-
: ----------------
FILE NUMBER : ---
2. Use the numeric keys and cursor pad to enter file name (max. 16 characters) and press the
[ENT] key. For example, enter FURUNO as the file name.
How to assign file name
[1_] key : 1 _ 1
[2ABC] : 2 A B C 2
[3DEF] : 3 D E F 3
[4GHI] : 4 G H I 4
[5JKL] : 5 J K L 5
[6MNO] : 6 M N O 6
[7PQRS] : 7 P Q R S 7
[8TUV] : 8 T U V 8
[9WXYZ] : 9 W X Y Z 9
[0_] : 0 _ 0
1. Press or to select location.
2. Press appropriate key.
3. Press the [ENT] key to open the file number entry window. Key in file number in three digits
with the numeric keys, and press the [ENT] key. For example, press [0] [0] [1] [ENT] to enter
file number 001.
Message file entry
*
FILE NAME
: FURUNO
000
FILE NUMBER : ---
4. Press the [ENT] key. The display shows the name and file number entered.
Message file entry
*
FURUNO
NO001 file entered
GO TO NEXT FILE
5. Press the [ENT] key to continue.
FILE ENTRY
Note: The available file number is 001-799 and
900-999. Do not use "8" as the first digit
of a file number.
FILE ENTRY
If the file name or number exists the message
"Duplicate name (number) ! Overwrite OK?" appears.
Press [ENT] to write over the name, or press
the [CANCEL] key to escape.
How to enter "FURUNO" as file name
1. Press the [3] key to display F.
2. Press .
3. Press the [8] key to select U.
4. Press .
6. Press the [7] key to select R.
7. Press .
8. Press the [8] key to select U.
7. Press .
8. Press the [6] key to select N.
9. Press .
10. Press the [6] key to select O.
6-3