Furuno DSC-60 Operator's Manual page 129

5. Key in channel no. and press the [ENT] key. For example, press [1], [2], [3], [4] and [ENT] to
enter channel 1234. The channel selected is shown in black on white characters at the top of
the screen.
User ch entry
!
***
MODE: NBDP
01234. TX:
01240. TX: 12666.0
01241. TX: 12777.5
01242. TX: 12999.5
01250. TX: 12100.0
# $
UP DOWN
6. Press the [ENT] key Enter Tx and press
example, enter 12345.5 kHz as the Tx frequency and 13456.0 kHz as the Rx frequency.
User ch entry
**
!
MODE : NBDP
01234. TX:
01240. TX: 12666.0
01241. TX: 12777.5
TX :
01242. TX: 12999.5
RX :
01250. TX: 12100.0
# $
UP DOWN
7. The display shows the information entered. Using the examples mentioned in this procedure,
Tx frequency 12345.5, Rx frequency 13456.0 are registered to channel 1234.
! User ch entry
***
MODE: NBDP
01234. TX: 12345.5
01240. TX: 12666.0
01241. TX: 12777.5
01242. TX: 12999.5
01250. TX: 12100.0
# $
UP DOWN
"
**
CH: 12-34
0.0 RX: 0.0
RX: 13666.0
RX: 13777.5
RX: 13999.5
RX: 13100.0
**
"
CH : 12-34
0.0 RX: 0.0
RX: 13666.0
RX: 13777.5
0.0 KHZ
RX: 13999.5
0.0 KHZ
RX: 13100.0
"
**
CH: 12-34
RX: 13456.0
RX: 13666.0
RX: 13777.5
RX: 13999.5
RX: 13100.0
. Enter Rx frequency and press the [ENT] key. For
7-11