Furuno DSC-60 Operator's Manual page 138

10. Do one of the following depending on the message shown in step 9.
Test acknowledge call received
The audio alarm sounds; press the [CANCEL] key to silence the alarm. The display changes as
below.
Received message
*
JUL-23-1999-23:59
TEST ACKNOWLEDGEMENT
FROM COAST :
001234567
SAFETY
NO INFORMATION
GO TO ALL VIEW
No response! Try calling again?
Re-send call: Press the [ENT] key (the display shown in step 6 appears) followed by the [CALL]
key to re-send the test call.
Cancel call: Press the [CANCEL] key to return to the DSC standby screen.
8-6
*
ECC : OK