Power Selection - Furuno DSC-60 Operator's Manual

By Cursor Pad
a) Press to shift the cursor to the band entry location.
b) Use or to set band. Band is displayed in the following sequence.
2
c) Press .
d) Use or to set channel.
e) Press the [ENT] key. The Tx and Rx frequencies of the channel entered appear.
Setting Range
ITU Band:
User Band:
ITU Channel:
User Channel:
Tx/Rx frequency selection
Select the Tx or Rx field and press the [ENT] key. Enter desired frequency with the numeric keys.
Press the [ENT] key to finish.
Note: If you enter the Tx frequency, the same frequency is entered to the Rx frequency.
MODE: TELEPHONE
CH: 12034
12 329.0
Tx :
13 176.00
Rx :
POWER: HIGH
TUNE
VOLUME

Power selection

Select the POWER field with the Cursor Pad and press the [ENT] key. Select power desired
among HIGH, MID and LOW with the Cursor Pad and press the [ENT] key.
MODE: TELEPHONE
CH: 12034
Tx: 12329.0
Rx: 13176.00
POWER: HIGH
TUNE
VOLUME
Note: Some FURUNO SSB radiotelephones do not provide the power selection HIGH, MID
or LOW.
4 6 8 12 16
ITU band
2/4/6/8/12/16/18/24/25
01-029
XX001 - XX193
XXX01 - XXX99
Select Tx (or Rx)
and press [ENT].
KHZ
KHZ
24
Select POWER
and press [ENT].
KHZ
KHZ
24
18 22 25 001
User channel
MODE:
Tx
Rx
POWER: HIGH
VOLUME
MODE:
Tx: 12329.0
Rx: 13176.00
POWER:
VOLUME
002----- 029
TELEPHONE
CH: 12034
12 329.0
:
0. 00
13 176.00
:
TUNE
TELEPHONE
CH: 12034
:
HIGH
MID
: OK
: HIGH
TUNE LOW
KHZ
KHZ
24
KHZ
KHZ
24
2-13