Furuno DSC-60 Operator's Manual page 72

7. Press the [ENT] key to open the COM. TYPE menu.
Send message
***
: GROUP CALL
CALL TYPE
TELEPHONE
: 012345678
GROUP ID
NBDP-FEC
$
: Routine
PRIORITY
: Telephone
COM. TYPE
: No infor
COM. FREQ
DSC FREQ
: 2M-INTL
8. Select communication type desired and press the [ENT] key.
9. Press the [ENT] key to open the COM. FREQ menu.
Send message
***
CALL TYPE : GROUP
GROUP ID :
NO INFO
PRIORITY : ROUTINE
COM. TYPE : TELEPHONE
FREQUENCY
COM. FREQ :
CHANNEL
DSC FREQ : 2M-INTL
GO TO ALL VIEW
GO TO ALL VIEW
10. Select communication frequency desired and press the [ENT] key. (See page 4-6 for details.)
11. Press the [ENT] key to open the DSC FREQ menu.
Send message
***
CALL TYPE
: Individual
2 MHZ
GROUP ID
: 001234567
4 MHZ
PRIORITY
: Routine
6 MHZ
COM. TYPE
: Telephone
8 MHZ
COM. FREQ
: No infor
$
$
12 MHZ
DSC FREQ
:
12. Select DSC band and then press the [ENT] key. Select DSC frequency and press the [ENT]
key. (See page 4-8 for details.)
4-18
***
SPECIAL
GO TO ALL VIEW
To select a user channel
***
If you have previously registered user channels (see page 7-10),
012345678
you can insert one into your message as follows:
1. Press the [FILE] key after completing step 8 in the
2164.0 kHz
2. Select file and press the [ENT] key to insert channel no.
***
CALL
E
ONE
12M-INTL
GO TO ALL VIEW
For Routine
$
Use to
scroll menu.
#
MAIN
TTY RCV
TTY
MORSE KEY
MORSE TAPE
FACSIMILE
For Safety or Urgency
TELEPHONE
NBDP-FEC
above procedure. The following display appears.
User channel file
00201. TX: 2301.0 RX: 2701.0
00202. TX: 2302.0 RX: 2702.0
00301. TX: 3301.0 RX: 3701.0
00302. TX: 3302.0 TX: 3702.0
$ #
UP DOWN
in message.
Use to scroll
16 MHZ menu.
18 MHZ
22 MHZ
25 MHZ OTHER: Special, private channels.
OTHER
MANUAL: For selection of frequency at
MANUAL
radiotelephone when there is "remote control
error."
Note: You can print the
User channel file list by pressing
the [8/PRINT] key.