Furuno DSC-60 Operator's Manual page 84

10. After the call is sent (timer counts down to zero) the following display appears.
Waiting for polling
acknowledgement.
FROM SHIP:
ROUTINE
DSC FREQ :
TIME TO GO:
11. The timer counts down the time remaining to wait for acknowledgment of the call. One of the
following displays appears. ("No response! Try calling again?" appears when there is no
response from receiving station; timer counts down to zero.)
Polling acknowledge
call received.
FROM SHIP :
ROUTINE
NO INFORMATION
Polling acknowledge
call received
12. Do one of the following depending on the message shown in step 11.
Polling acknowledge call received
The audio alarm sounds; press the [CANCEL] key to silence the alarm. The display changes as
below. You can confirm if called party is within communicating range.
Received message
*
JUL-23-1999-23:59
POLLING ACKNOWLEDGE
FROM SHIP:
ROUTINE
NO INFORMATION
GO TO ALL VIEW
No response! Try calling again?
Re-send call: Press the [ENT] key (the display shown in step 8 appears), followed by the [CALL]
key to re-send the call.
Cancel call: Press the [CANCEL] key to return to the DSC standby screen.
4-30
123456789
2177.0 KHZ
4M59S
123456789
STOP ALARM
*
ECC: OK
123456789
No response!
Try calling again?
FROM SHIP:
ROUTINE
DSC FREQ :
2177.0 KHZ
CALL AGAIN
No response
123456789