Furuno DSC-60 Operator's Manual page 59

4. Key in ID of station where to send the message and then press the [ENT] key.
5. Press the [ENT] key to open the PRIORITY menu.
Send message
***
: INDIVIDUAL
CALL TYPE
ROUTINE
: ---------
STATION ID
BUSINESS
:
PRIORITY
SAFETY
: TELEPHONE
COM. TYPE
URGENCY
: NO INFOR
COM. FREQ
: 2M-INTL
DSC FREQ
GO TO ALL VIEW
6. Select appropriate priority (normally ROUTINE) and press the [ENT] key.
7. Press the [ENT] key to open the COM. TYPE menu.
Send message
***
: INDIVIDUAL
CALL TYPE
TELEPHONE
: ---------
STATION ID
NBDP-ARQ
$ : ROUTINE
PRIORITY
NBDP-FEC
: SPECIAL
COM. TYPE
: NO INFOR
COM. FREQ
: 2M-INTL
DSC FREQ
8. Select communications type desired and press the [ENT] key.
9. Press the [ENT] key to open the COM. FREQ menu.
Send message
***
: INDIVIDUAL
CALL TYPE
STATION ID : 123456789
NO INFO
PRIORITY
FREQUENCY
COM. TYPE
CHANNEL
COM. FREQ
POSITION*
DSC FREQ
: 12M-INTL
GO TO ALL VIEW
* POSITION is displayed if a coast
station is specified at step 3.
10. Select item desired and press the [ENT] key. For FREQUENCY and CHANNEL see "How to
Set Working Frequency" on the next page. NO INFO and POSITION lets the receiving
station set the working frequency. Select NO INFO or POSITION to send message to a coast
station. Select FREQUENCY or CHANNEL to send message to ship station.
***
Routine or
Business Priority
#
***
MAIN
TTY RCV
TTY
MORSE KEY
MORSE TAPE
FACSIMILE
DATA
* MODEM TYPE
V21
V22
V22 BIS
V23
To select a user channel
***
If you have previously registered user channels (see page 7-10),
you can insert one into your message as follows:
1. Press the [FILE] key after completing step 8 in the
above procedure. The following display appears.
User channel file
00201. TX: 2301.0 RX: 2701.0
00202. TX: 2302.0 RX: 2702.0
00301. TX: 3301.0 RX: 3701.0
00302. TX: 3302.0 TX: 3702.0
$ #
UP DOWN
2. Select file and press the [ENT] key to insert channel no.
in message.
For Safety or
Urgency Priority
TELEPHONE
NBPD-ARC
NBDP-FEC
For SPECIAL items, the radiotelepho
is not controlled automatically. Set
frequency, class of emission, etc. at
Press [ENT]
the radiotelephone.
to display.
*
V26 BIS
V26 TER
V27 TER
V32
Note: You can print the
User channel file list by pressing
the [8/PRINT] key.
4-5