Furuno DSC-60 Operator's Manual page 69

4. Select ABLE and press the [ENT] key. The display changes as below. (IF ABLE is sent,
working frequency is automatically set specified by other party.)
Send message
***
CALL TYPE: ABLE
ACKNOWLEDGEMENT
TO COAST: 121234567
COM. TYPE: TELEPHONE
COM. FREQ: CH12034
DSC FREQ:
12577.5 KHZ
GO TO ALL VIEW
5. Press the [CALL] key to send the call, and the display changes as below.
Able acknowledge
call in progress!
TO COAST :
121234567
ROUTINE
TELEPHONE
DSC FREQ :
TIME TO GO:
6. After the call is sent (transmission time: 7 sec.), you can begin voice communications as
soon as the message is completely transmitted.)
Manually acknowledging individual call with "UN ABLE"
1. When an individual call is received the alarm sounds and the display shows the message
"Individual request call received."
Individual request
call received.
FROM SHIP:
ROUTINE
TELEPHONE
STOP ALARM
2. Press the [CANCEL] key to silence the alarm, and the display changes as below.
Received message
*
JUL-23-1999-23:00:00
INDIVIDUAL REQUEST
FROM SHIP:
ROUTINE
TELEPHONE
! "
ANSWER
3. Press to select ANSWER and press the [ENT] key.
***
CH 12034
12577.5
KHZ
7S
121234567
CH 12034
*
ECC: OK
121234567
CH 12034
ALL VIEW
4-15