Furuno DSC-60 Operator's Manual page 75

5. Press the [ENT] key to open the PRIORITY menu.
Send message
***
CALL TYPE
AREA :
12˚N 123˚W
PRIORITY
COM. TYPE
COM. FREQ
DSC FREQ
6. Select priority desired and press the [ENT] key.
7. Press the [ENT] key to open the COM. TYPE menu.
Send message
***
CALL TYPE : AREA CALL
AREA :
12˚N 123˚W
PRIORITY : Routine
COM. TYPE : Telephone
COM. FREQ : No infor
DSC FREQ : 2M-INTL
GO TO ALL VIEW
8. Select communication type desired and press the [ENT] key.
9. Press the [ENT] key to open the COM. FREQ menu.
Send message
***
CALL TYPE
AREA:
12˚N 123˚W
PRIORITY
COM. TYPE
COM. FREQ
DSC FREQ
10. Select communication frequency desired and press the [ENT] key. (See page 4-6 for details.)
***
: AREA CALL
ROUTINE
12˚ 12˚
SAFETY
: Routine
URGENCY
: Telephone
: NO INFO
: 2M-INTL
GO TO ALL VIEW
For ROUTINE
***
TELEPHONE
TELEPHONE
NBDP-FEC
12˚ 12˚ $
NBDP-FEC
$
SPECIAL
For SAFETY or
URGENCY
TELEPHONE
NBDP-FEC
To select a user channel
***
: AREA CALL
If you have previously registered user channels (see page 7-10),
12˚ 12˚
you can insert one into your message as follows:
NO INFO
FREQUENCY
1. Press the [FILE] key after completing step 8 in the
CHANNEL
: 2M-INTL
GO TO ALL VIEW
2. Select file and press the [ENT] key to insert channel no.
SPECIAL
#
MAIN
TTY RCV
TTY
MORSE KEY
MORSE TAPE
FACSIMILE
above procedure. The following display appears.
User channel file
00201. TX: 2301.0 RX: 2701.0
00202. TX: 2302.0 RX: 2702.0
00301. TX: 3301.0 RX: 3701.0
00302. TX: 3302.0 TX: 3702.0
$ #
UP DOWN
in message.
Note: You can print the
User channel file list by pressing
the [8/PRINT] key.
4-21