Eaton Cutler-Hammer FP-5000 Instructions Manual page 78

Page 5-30
Table 5.8 Clock
Display Setting Description
Clock Time and Date
Date mode: Select date format
Time mode: Select standard time
or military time
Year: Select year
Month: Select month
Day: Select Day
Hour: Select hour (set in 24 hour mode)
Minute: Select minute
Second: Select Seconds
Update Clock!
Table 5.9 Communications
Display Setting Description
INCOM INCOM Communications Settings
Enable: Enable INCOM communications
Address: Select Communication address
of FP5000
Baud rate: Baud rate fixed at 9600 baud
Accessory Bus Accessory Bus Address
and Baud rate setting
Address: Select Communication address
of FP5000
Baud rate: Baud rate fixed at 9600 baud
RS-232 RS-232 Baud Rate Setting
Baud rate: Select baud rate
for RS-232 communications
Setpoint Range/
Value Selection
MM/DD/YY or DD/MM/YY
12 or 24
0 to 99
1 to 12
1 to 31
0 to 23
0 to 59
0 to 59
Press the "Enter" pushbutton
after setting clock to update the clock
Setpoint Range/
Value Selection
Yes or No
1 to 0xFFE (Hex Value -
increments of 1)
Fixed at 9600 Baud
1 to 0xFFE (Hex Value -
increments of 1)
Fixed at 9600 Baud
9600, 19200,
or 38400 Baud
IL17569
Default Selected Refer to
Setting Value Sec. #
5.5.8
0 5.5.8
12 5.5.8
0 5.5.8
1 5.5.8
1 5.5.8
0 5.5.8
0 5.5.8
0 5.5.8
Default Selected Refer to
Setting Value Sec. #
5.5.9
Yes 5.5.9
1 5.5.9
9600 5.5.9
5.5.9
2 5.5.9
9600 5.5.9
5.5.9
19200 5.5.9
Effective June, 2001