Eaton Cutler-Hammer FP-5000 Instructions Manual page 58

Page 5-10
Table 5.2 Power Factor (continued)
Display Setting Description
55D Displacement Power Factor Settings
Displacement PF
Trigger PF: Select power factor to trigger on
Reset PF: Select power factor to reset on
Delay (s): Select delay time in seconds
Table 5.2 Zone Interlocking: Selects Zone In and Zone Out settings
Zone Interlocking Zone Interlocking Settings
Zone in: Select zone in function
Zone Out: Select zone out function
Table 5.2 Alarms: Selects Alarms settings for all protection functions – 50P-3, 50X-3, 50R-3, 46-2, 47-2, 59-M2, 27M-2,
59A-2, 27A-2, 81O-2, and 81U-2
50P-3 PH IOC Phase Overcurrent Alarm Setting
Alarm
Pickup: Select current pickup value
in per unit values (x I
Delay (c): Select delay time in cycles
Direction: Directional control reserved
for future use
50X-3 IX IOC Fourth Ct Overcurrent
Alarm Alarm Setting Alarm Setting
Pickup: Select current pickup value
in per unit values (x I
Delay (c): Select delay time in cycles
Direction: Directional control reserved
for future use
50R-3 IR IOC Residual Time Overcurrent
Alarm Alarm Setting
Pickup: Select current pickup value
in per unit values (x I
Delay (c): Select delay time in cycles
Direction: Directional control reserved
for future use
Setpoint Range/
Value Selection
0.50 to 1.00 (lag), -0.50 to
-0.99 (lead), disable
(0.01 pu increments)
0.50 to 1.00 (lag), -0.50 to
-0.99 (lead), disable
(0.01 pu increments)
0 to 1000 seconds
(1 second increments)
Disable, Phase, Ground, Both
Disable, Phase, Ground, Both
0.1 to 20.0 pu, Disable
) (0.01 increments)
nom
0 to 9999 cycles
(1 cycle increments)
(Fixed at Both)
0.1 to 20.0 pu, Disable
) (0.01 increments)
nom
0 to 9999 cycles
(1 cycle increments)
(Fixed at Both)
0.1 to 20.0 pu, Disable
) (0.01 increments)
nom
0 to 9999 cycles
(1 cycle increments)
(Fixed at Both)
IL17569
Default Selected Refer to
Setting Value Sec. #
5.5.2.8
Disable 5.5.2.8
Disable 5.5.2.8
0 5.5.2.8
5.5.2.9
8.5
Disable
Disable
5.5.2.10
5.5.2.1
8.3
Disable
0
Both
5.5.2.10
5.5.2.2
8.3
Disable
0
Both
5.5.2.3
5.5.2.10
8.3
Disable
0
Both
Effective June, 2001