Selftest
If you feel that your programmer does not react according to your expectation, please run the
programmer (ISP connector) selftest using Diagnostic pod (Diagnostic pod for ISP connectors
#2), enclosed in the standard delivery package.
Selftest of programmer
Insert 48 pins diagnostic pod - type I into ZIF socket of the programmer. 48 pins
diagnostic pod - type I must be inserted as 48 pins device.
Run selftest of programmer in PG4UW (menu Programmer / Selftest).
Selftest of ISP connector
Insert Diagnostic pod for ISP connectors #2 into ZIF socket of the programmer.
Diagnostic pod for ISP connectors #2 must be inserted as 48 pins device.
Interconnect 20 pins connector of Diagnostic pod for ISP connectors #2 with an ISP
connector of the programmer with an ISP cable, included in delivery programmer package.
Be sure that pins are interconnected properly (i.e. 1-1, 2-2... 20-20).
Run selftest of ISP connector in PG4UW (menu Programmer / Selftest ISP connector...).
23
DATAMAN-448PRO2