Selftest - Dataman -848PRO2 User Manual

DATAMAN-848PRO2 apply programming voltage to target device and checks his
value (target system can modify programming voltage). If the programming voltage
is different from expected, no action with target device will be executed.

Selftest

Warning:
Selftest can be run in engineering mode only.
This mode is available only when external display, keyboard and mouse are connected
to DATAMAN-848PRO2.
If you feel that your programmer does not react according to your expectation, please
run the programmer (ISP connector's) selftest using Diagnostic POD (Diagnostic POD
for ISP connectors #2), enclosed in the standard delivery package.
Selftest of programmer
Insert 48 pin diagnostic POD - type I into ZIF socket of the programmer. Take care
about orientation of 48 pin diagnostic POD - type I (see top side of POD).
Run selftest of programmer in PG4UW (Programmer / Selftest plus).
Selftest of ISP connector
Insert Diagnostic POD for ISP connector #2 into ZIF socket of the programmer.
Take care about orientation of Diagnostic POD for ISP connector #2.
Interconnect the 20 pin connector of Diagnostic POD for ISP connector #2 with
the ISP connector of the programmer with the ISP cable included in delivery with the
programmer package. Be sure that the pins are interconnected properly (i.e. 1-1, 2-
2, ..., 20-20).
Run selftest of ISP connector in PG4UW (Programmer / Selftest ISP connector...).
10