Dataman 448PRO2 User Manual page 29

Buffer operations
view/edit, find/replace
fill/copy, move, byte swap, word/dword split
checksum (byte, word)
print
File load/save
no download time because programmer is PC controlled
automatic file type identification/recognition
Supported file formats
unformatted (raw) binary
HEX: Intel, Intel EXT, Motorola S-record, MOS, Exormax, Tektronix, ASCII-SPACE-HEX,
ASCII HEX
Altera POF, JEDEC (ver. 3.0.A), e.g. from ABEL, CUPL, PALASM, TANGO PLD, OrCAD
PLD, PLD Designer ISDATA, etc.
JAM (JEDEC STAPL Format), JBC (Jam STAPL Byte Code), STAPL (STAPL File) JEDEC
standard JESD-71
VME (ispVME file VME2.0/VME3.0)
SVF (Serial Vector Format revision E)
STP (Actel STAPL file)
GENERAL
supply voltage AC 90-264V, max. 1.2A, 47-63Hz
power consumption max. 60W active
dimensions 361x234x56 mm (14.2x9.2x2.2 inch)
weight (programmer) 3.5kg (7.7 lb)
operating temperature 5°C ÷ 40°C (41°F ÷ 104°F)
operating humidity 20%...80%, non condensing
29
DATAMAN-448PRO2