Dataman 448PRO2 User Manual page 78

F6
F7
F8
F9
F10
F11
F12
Arrow keys
Home/End
PgUp/PgDn
Ctrl+PgUp/PgDn
Ctrl+Home/End
Shift+Home/End
Backspace
Note: Characters 20H - FFH (mode ASCII) and numbers 0...9, A...F (mode HEX) immediately
changes content of edit area.
Warning: Editing of ASCII characters for word devices is disabled.
Print buffer
This command allows write selected part of buffer to printer or to file. Program uses at it an
external text editor in which selected block of buffer is displayed and can be printed or saved to
file, too. By default is set simple text editor notepad.exe, which is standard part of all versions
of Windows.
In Print buffer dialog are following options:
Block start
Defines start address of selected block in buffer.
Block end
Defines end address of selected block in buffer.
External editor
This item defines path and name of external program, which has to be used as text viewer for
selected block of buffer. By default is set simple text editor notepad.exe, which is standard part
of all versions of Windows. User can define any text editor for example wordpad.exe, which is
able to work with large text files. In user defined text editor user can print or save to file
selected block of buffer.
The external editor path and name is saved automatically to disk.
Find dialog box
Enter the search string to Find to text input box and choose <Find> to begin the search or
choose <Cancel> to forget it.
Direction box specifies which way you want to search, starting from the current cursor position
(In edit mode). Forward (from the current position or start of buffer to the end of the buffer) is
the default. Backward searches toward the beginning. In view mode searches all buffer.
Origin specifies where the search should start.
modifies addresses itself (start address is moved on lower even address
and/or end address is moved on higher odd address).
print buffer
find string (max. length 16 ASCII characters)
find and replace string (max. 16 ASCII chars.)
change current address
change mode view / edit
switch the mode of buffer data view between 8 bit and 16 bit view. It can
be also doing by mouse clicking on the button to the right of View/Edit
mode buffer indicator. This button indicates actual data view mode (8 bit or
16 bit), too.
checksum dialog allows counting checksum of selected block of buffer
move cursor up, down, right and left
jump on start / end current line
jump on previous / next page
jump on start / end current page
jump on start / end current device
jump on start / end current buffer
move cursor one position left (back)
78